Custom Drawer Jewelry Boxes — Rigid Board, Ribbon Pull, Insert Cut to Your Pieces

A custom drawer jewelry box is a rigid outer case with a sliding tray inside, opened by a ribbon tab, holding a foam insert that is cut to the outline of your pieces. It is the format jewellery brands use for necklaces, earrings, rings and bracelets, both at the counter and in the parcel that arrives after an online order. Every part is made to order at Longyin Printing: the case and drawer size, the wrap paper, the drawer colour, the ribbon, the foil and the insert are all produced from your specification rather than selected from an existing range.

Send your specs and get a custom quote.

What You Can Specify on a Made-to-Order Drawer Box

The case, the drawer, the insert and the branding are all built to your product, so the box is drawn around the piece rather than the piece fitted to a box. The table below shows what each decision changes.

The same wrap paper, board and foil are used across the custom paper gift bags we produce, so a drawer box and its carrier bag can be made in one brand colour for the same counter.

Why the Foam Insert Is Cut to Your Pieces

The insert is die-cut to the outline of each piece, so a necklace, a pair of earrings and a ring each sit in their own slot instead of moving inside the tray. The cutting line is drawn from your product dimensions and the insert is set before the run, because a jewellery tray cannot be adjusted afterwards without cutting a new tool. A black foam insert also lifts the product against the lining colour, which is what makes a fine chain or a polished setting readable the moment the drawer opens. This is why a jewelry box with foam insert is specified around the actual pieces rather than around the box size.

Paper, Board and Foil: What Makes the Box Feel Rigid

The structure is 157 gsm specialty paper wrapped over 1,000 g rigid board, and those two figures are what make the box feel solid rather than folded. The board holds the corners square and keeps the drawer aligned as it slides, while the wrap paper decides the surface: a textured specialty paper takes foil cleanly and hides fingerprints better than a smooth coated sheet. Foil stamping is applied after the wrap, so the mark sits on the finished surface, and the same process carries a logo, a brand line or a short blessing message on the lid. The interior and the drawer front can be a contrast colour, which is how a cream case with a rose gold drawer gets its two-tone look. The same board and wrap also run on our custom printed cardboard boxes in other formats, where a piece needs a rigid case rather than a drawer.

Which Sizes and Colourways Work for Jewelry

The sizes we produce most for jewellery run from about 5 x 5 x 3.5 cm for a single ring to 9 x 9 x 3.5 cm for a necklace or a set, with 7.5 x 7.5 x 3.5 cm and 7 x 9 x 3.5 cm covering most earring and pendant pairs. A 3.5 cm depth is enough to hold a foam insert with a seated necklace without the lid pressing on the chain. Colourways are printed to your brand: cream with a rose gold drawer, blush or coral, teal, and grey green with a coral drawer are the combinations we run most, and the drawer front takes a different colour from the case whenever you want the contrast.

Where Custom Drawer Jewelry Boxes Are Used

They are used for jewellery retail packaging, brand counter displays, e-commerce parcels and gifts, and they suit any small piece that has to look protected the moment the box is opened. A drawer format is chosen where a lid box would be opened by lifting: the tray slides out towards the customer, which makes the piece easier to present and the box easier to reclose after a try-on. The full range of packaging box printing we produce sits alongside the drawer box lines if you want the same paper in another structure.

One Factory That Holds Colour and Foil Across the Run

Longyin International Printing Group Limited prints, foils, cuts and wraps these boxes in a 20,000 m2 plant in Shenzhen Longhua, with 300+ employees and 50+ technical specialists who each bring 10+ years of printing experience. For a buyer ordering jewellery packaging by the thousand, what matters is that the thousandth box matches the first:

• Kodak CTP platesetting and Heidelberg and Komori 4-8 colour presses hold colour to a Delta-E below 2.0 across a long run, so a repeat order lands on the same brand colour.
• Automatic gilding lines handle the foil stamping, and cutting is held within +/-0.5 mm, which is what keeps the drawer and the case sliding cleanly together.
• Quality systems are certified to ISO 9001, ISO 14001, FSC chain of custody and BSCI social compliance, verified by SGS, with Alibaba Trade Assurance available on orders.
• Quotations are issued within 24 hours, replies within 2 hours, and the production window is confirmed in your quote before you commit.

What to Send for a Quote

Send the dimensions of the pieces, the quantity, the box size you have in mind, the wrap paper and colour, the drawer colour, whether the logo is foil stamped, and the date you are working towards. The piece dimensions decide the insert, the insert decides the tray depth, and the tray depth decides the case, so those three are drawn together. Quotes are issued within 24 hours.

Sampling, Production and Payment

Sampling takes about 1-7 working days depending on the structure and the print, and the sample is proved as a loaded box rather than a flat printed sheet. Once the sample is approved, the bulk run is scheduled to your delivery window. Payment terms are 40% deposit with the 60% balance before shipping, and confirmed quality issues are covered by a free reprint or refund. Air freight and sea freight are both available, with DDP and DDU door-to-door options. Pieces that ship as parcels travel inside the custom corrugated mailer boxes we produce, sized to the consolidated carton rather than to the jewellery box.

---

Technical Specifications

---

Key Takeaways

• A drawer jewelry box is a rigid case with a sliding tray, opened by a ribbon tab, so the piece is presented by sliding rather than lifting.
• The structure is specialty paper wrapped over 1,000 g rigid board, which is what keeps the corners square and the drawer aligned.
• The foam insert is die-cut to your necklace, earring or ring outline, and it has to be set before the run because the tool cannot be adjusted afterwards.
• Common jewellery sizes run from 5 x 5 x 3.5 cm for a ring to 9 x 9 x 3.5 cm for a necklace, with 3.5 cm depth seating the insert.
• Foil stamping is applied after the wrap, so the logo or blessing line sits on the finished surface and reads as a metal accent.
• Colour is held to a Delta-E below 2.0 and cutting within +/-0.5 mm, which is what makes a repeat order match the first shipment.

---

Frequently Asked Questions (FAQ)

Q: What is a drawer jewelry box used for?

A: Necklaces, earrings, rings and bracelets, for retail counters, e-commerce parcels and gifts. The tray slides out towards the customer instead of the lid lifting off, which presents the piece better and makes the box easy to reclose after a try-on.

Q: What is the box made of?

A: 157 gsm specialty textured paper wrapped over 1,000 g rigid board, with a foam insert inside and a ribbon tab on the drawer. The board gives the box its solid feel and keeps the drawer sliding straight.

Q: Can the insert be made for my exact pieces?

A: Yes. The foam is die-cut to the outline of your necklace, earrings or rings, so each piece sits in its own slot. The cutting line is drawn from your product dimensions and confirmed at the sample stage.

Q: What sizes can you produce?

A: Any size built from your product. The sizes we run most for jewellery are 5 x 5 x 3.5 cm, 7.5 x 7.5 x 3.5 cm, 7 x 9 x 3.5 cm and 9 x 9 x 3.5 cm.

Q: Can the logo be foil stamped?

A: Yes, and foil is the usual choice on this box because it sits on the specialty paper as a metal accent. Logo lines, brand names and short blessing messages are all stamped after the wrap, with one design per order.

Q: Can the drawer be a different colour from the case?

A: Yes. A cream case with a rose gold drawer is the two-tone combination we run most, and blush, coral, teal and grey green are also common. The drawer front and the interior lining can both be colour matched.

Q: How long does sampling take?

A: About 1-7 working days depending on the structure and the print. The sample is checked as a loaded box with the insert fitted, and the bulk production window is confirmed in your quote afterwards.

Q: What if there is a quality issue?

A: Board thickness, wrap alignment, foil registration, cutting accuracy and the drawer fit are checked during the run. Confirmed quality issues are covered by a free reprint or refund.

Send your specs and get a custom quote.

---