{"id":1255,"date":"2025-03-03T03:54:18","date_gmt":"2025-03-02T19:54:18","guid":{"rendered":"https:\/\/hkbookprinting.com\/?post_type=product&p=1255"},"modified":"2026-10-14T14:14:05","modified_gmt":"2026-10-14T06:14:05","slug":"custom-earrings-necklace-box","status":"publish","type":"product","link":"https:\/\/www.hkbookprinting.com\/en\/product\/custom-earrings-necklace-box\/","title":{"rendered":"Custom Earrings Necklace Box | Lid & Base, Cut Insert"},"content":{"rendered":"
\n
Product Description<\/span><\/div>\n
\n

Custom Earrings Necklace Box \u2014 Lid and Base, Gold Frame Line, Insert Cut to Your Jewellery<\/h1>\n

A custom earrings necklace box is a small rigid box with a lid that lifts off the base, a printed or foil stamped frame line around the lid, and an insert inside cut to the jewellery you ship.<\/strong>\u00a0It is made for earring pairs, fine chains, pendants and rings, where the box holds one item and goes straight to the customer. Everything is produced to order at\u00a0Longyin Printing<\/strong><\/em>: the size, the wrap colour, the frame line, the foil, the insert layout and the print on the lid are all built for your order rather than chosen from a fixed range.<\/p>\n

Send your specs and get a custom quote.<\/a><\/em><\/span><\/span><\/h2>\n

What You Can Specify on a Custom Earrings Necklace Box<\/h3>\n

Every decision on this box is made against the piece that goes inside it, because the insert has to hold the jewellery still and the lid has to close flat over it.<\/strong>\u00a0The table below shows what each choice changes.<\/p>\n

\n
\n\n\n\n\n\n\n\n\n\n\n\n
What you specify<\/th>\nWhat we produce to your spec<\/th>\nWhat it changes for you<\/th>\n<\/tr>\n
Box size<\/td>\nAny square or rectangular footprint and depth, built from the piece<\/td>\nWhether a chain sits flat or has to be coiled<\/td>\n<\/tr>\n
Insert layout<\/td>\nCut positions for earring pairs, a chain, a pendant or a ring<\/td>\nWhether pieces stay apart in transit or tangle together<\/td>\n<\/tr>\n
Insert surface<\/td>\nBlack or coloured, smooth or soft-touch, with the cut depth to your setting<\/td>\nHow the metal reads against the surface when the lid is opened<\/td>\n<\/tr>\n
Frame line<\/td>\nA gold or coloured frame line printed or foil stamped around the lid<\/td>\nA formal edge that lifts a plain wrap colour<\/td>\n<\/tr>\n
Wrap colour<\/td>\nNavy, pink, black, light blue, green, white or your brand colour<\/td>\nWhether the box sits under a brand colour system or a seasonal range<\/td>\n<\/tr>\n
Lid print<\/td>\nA logo or a short line, printed or foil stamped, one design per order<\/td>\nWhether the box carries the brand or stays plain<\/td>\n<\/tr>\n
Size set<\/td>\nTwo or three running sizes from one design<\/td>\nOne order covering earrings, pendants and necklaces<\/td>\n<\/tr>\n
Wrap paper<\/td>\nTextured art paper, smooth printed paper or a soft-touch finish<\/td>\nSurface feel in the hand and how the frame line catches light<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

Why the Insert Is Cut to Your Jewellery<\/h3>\n

The insert is the part that decides whether the jewellery arrives undamaged, so it is cut to the actual piece rather than to a generic size.<\/strong>\u00a0An earring pair needs two shallow positions set far enough apart that the posts cannot touch; a fine chain needs a route that keeps it from knotting, usually a shallow channel with a notch to hold the clasp; a ring needs a slot that grips the band so the stone never rests on the insert surface. For buyers running a jewellery box with insert across several products, the same insert block can carry two or three cut positions. Where a project needs a sliding format instead of a lift-off lid, the same insert logic runs on our\u00a0custom drawer jewelry boxes<\/a><\/em>.<\/span><\/p>\n

The insert is checked with sample pieces before the run, so the cut depth is confirmed against the real setting height rather than against a drawing.<\/p>\n

The Lid and Base: Why the Box Closes Flat and Sits Square<\/h3>\n

A lid and base box is two rigid trays wrapped separately, and the lid overlap is set so the box closes with a firm slide and no gap at the seam.<\/strong>\u00a0The board gives the corners their square, which is what stops a small box looking soft under a bright frame line, and the wrap decides how the surface reads. Because the lid is a separate piece, the frame line and the logo are positioned on the lid before wrapping, so the line stays parallel to the edge on every box. Sets that need a ribbon or a matching carrier bag are built on the same principle in our\u00a0custom rigid gift boxes<\/a><\/em><\/span>, where a larger lid and base box is finished as a gift set.<\/p>\n

Sizes, Colours and the Gold Frame Line<\/h3>\n

Sizes run from about 5 x 5 x 3.5 cm for a single earring pair up to 9 x 9 x 3.5 cm for a pendant or a chain, with 7.5 x 7.5 x 3.5 cm covering most programmes, and the depth can be increased where an insert needs more room.<\/strong>\u00a0Colours are matched to your brand, and the combinations we produce most are navy with a gold frame line, black with a gold frame line, pink with a gold frame line, light blue and green. The frame line is the detail that carries the design: it can sit as a single fine line just inside the lid edge, be doubled, or be replaced by an all-over print. The logo on the lid is one design per order, so every box in a shipment carries the same artwork.<\/p>\n

Where Custom Small Jewelry Boxes Are Used<\/h3>\n

They are used for earring pairs, fine chains, pendants, rings and single-stone pieces, in jewellery retail, online order fulfilment, repair returns and gift sets.<\/strong>\u00a0A small box is chosen where one item is presented on its own and the customer keeps the box afterwards, which makes the finished piece part of the purchase rather than transport around it. Stores running several categories usually order a size set so earrings, pendants and chains all sit in boxes of the same finish.<\/p>\n

Certifications and Quality Control Behind Each Run<\/h3>\n

Longyin International Printing Group Limited operates a 20,000 m2 plant in Shenzhen Longhua with 300+ employees and 50+ technical specialists, each with 10+ years of printing experience, and every jewellery box order carries the documentation a retail buyer has to file.<\/strong>\u00a0For a jewellery programme, that documentation is often what decides the supplier:<\/p>\n